Polyurethane Foam Applicator, ideal for sealing, filling and insulating small gaps. It is a solid and durable, lightweight and compact tool, ergonomically designed to use for longer periods.Easy to clean and a sprung trigger to accurately control flow. Specifications Model: BC-1573 Polyurethane Foam Applicator Gun CE certification Power Source:Manual Gun Trigger Material:Steel with Non-Stick PTFE Coating Gun Tube Material:Steel with Non-Stick PTFE Coating Size:750ml & 500ml Gun Dimensions: 32.5cm (L)x 20cm(W) Tube Length: 18.5cm Nozzle Diameter: 2mm Gun End Nozzle:Brass Gun Colour: Black and Red Features Ergonomic Design Double Colour Rubber Handle Non-Stick PTFECoated for easy, non scratch cleaning. Corrosion and wear resistant Sprung control trigger Package Comes packed in a cardboard triangle box. 1 x PU Foam Applicator Gun 1 x Plastic Tube 2 x Plastic Nozzle Directions for use of the foam gun Take a can of gun foam and shake vigorously. Screw can on to adapter of gun(not too tight). Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam. The foam gun i snow ready to use. Foam output can be controlled with flow adjustment screw. After use of the foam gun Leave gun filled with foam after use.Always keep a filled can of gun foam on the gun. Tighten the flow adjustment screw completely.Do not empty the gun.Gun must always be filled with foam,otherwise foam is cured due to the humidity in the air. Put can away in a vertical position(gun upwards). Use foam gun again Shake the can vigorously(keep hold of the gun). Remove cured foam at the tip of the nozzle carefully with a small,sharp knife. Release the flow adjustment screw lightly and dispense foam immediately until the flow of foam is correct. The gun is now ready to use. Foam output can be controlled with trigger of the gun. Replacing of the can gun foam Check if the can is empty by dispensing foam in a dust-bin until no more foam is released. Take a new can of gun foam.Shake vigorously. Unscrew the empty can(keep valve opening away from you),remove released foam from adapter and replace the empty can immediately by a new one. Dispense foam immediately to fill the extension tube. Cleaning of the foam gun at times of interruption Unscrew the can of gun foam (keep valve opening away from you). Take a can gun cleaner and screw the can on the gun. Pull the trigger again to refill the gun with cleaner. Cleaner has to remain in the gun for about 5 minutes. Pull the trigger again to refill the gun with cleaner. Unscrew the can gun cleaner. Screw the can gun foam onto the gun. Pull trigger of the gun again until foam is released and cleaner completely removed. The gun is now ready to use.

Read more less

Heavy Metal Polyurethane Foam Applicator, ideal for sealing, filling and insulating small gaps. It is a heavy duty yet lightweight and compact tool, ergonomically designed to use for longer periods. Easy to use and has a sprung trigger to accurately control flow. Specifications Model: BC-1506 Polyurethane Foam Applicator Gun  CE certification Power Source: Manual Gun Tube Material: Steel with Coating Gun Body Material: Aluminum Alloy Gun Trigger Material: Steel Trigger with Nickel Coated Gun Adapter Material: Universal Zinc Alloy Adapter Gun Needle Material Stainless Steel Sealing Needle Gun Nozzle Material Brass Gun Barrel Material: Steel with Nickel Coated Gun Barrel Length:19 cm Gun Handle Material Environmental PP Handle Gun Adapter Finish Teflon Coated Size: 750ml & 500ml Gun Dimensions: 32.5cm (L)x 15cm(W) Tube Length: 18.5cm Nozzle Diameter: 2mm Gun End Nozzle: Brass Gun Colour: Stainless Steel silver and Black Features Heavy Duty Nickel Coated Lightweight yet strong Sprung trigger allows you to accurately control flow Fitting the Foam Gun is quick and easy - just screw onto any gun grade canister. Using the gun is easy too, simply pull the trigger to release a controlled flow of expanding foam Package Comes packed in a cardboard triangle box. 1 x PU Foam Applicator Gun 1 x Plastic Tube 2 x Plastic Nozzle  How to use PU foam gun Take a can of gun foam and shake vigorously. Screw can on to adapter of gun(not too tight). Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam. The foam gun i snow ready to use. Foam output can be controlled with flow adjustment screw. After use of the foam gun Leave gun filled with foam after use.Always keep a filled can of gun foam on the gun. Tighten the flow adjustment screw completely.Do not empty the gun.Gun must always be filled with foam,otherwise foam is cured due to the humidity in the air. Put can away in a vertical position(gun upwards). Use foam gun again Shake the can vigorously(keep hold of the gun). Remove cured foam at the tip of the nozzle carefully with a small,sharp knife. Release the flow adjustment screw lightly and dispense foam immediately until the flow of foam is correct. The gun is now ready to use. Foam output can be controlled with trigger of the gun. Replacing of the can gun foam Check if the can is empty by dispensing foam in a dust-bin until no more foam is released. Take a new can of gun foam.Shake vigorously. Unscrew the empty can(keep valve opening away from you),remove released foam from adapter and replace the empty can immediately by a new one. Dispense foam immediately to fill the extension tube. Cleaning of the foam gun at times of interruption Unscrew the can of gun foam (keep valve opening away from you). Take a can gun cleaner and screw the can on the gun. Pull the trigger again to refill the gun with cleaner. Cleaner has to remain in the gun for about 5 minutes. Pull the trigger again to refill the gun with cleaner. Unscrew the can gun cleaner. Screw the can gun foam onto the gun. Pull trigger of the gun again until foam is released and cleaner completely removed. The gun is now ready to use.

Read more less

Practical and durable spatula for cooking and bakingMade of food-grade silicone, perfect for coated and non-stick cookware.Heat-resistant up to 500°C, safe for use with hot foods and around cookware and dishwasher safe.Perfect for stirring, scraping and folding a variety of foods.Coated with soft silicone and stainless steel inside.There is a hanging loop at each end of the spatulas for easy storage.Widely used in:1. Stir flour to make cake2. Scrape out the rest of the product from the small jar to the large mixing bowl3. Scrape and spread butter, cream or salad on the cake or bread4. Stir and move food in potsSize: 195mm * 41mm, thickness: 7.5 mmColor: Blue, Red, Orange, Yellow, Pink and GreenMaterial: siliconeReturns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Discover this versatile cement hand pump with 4 interchangeable nozzles, ideal for grouting and grouting. With four interchangeable nozzles, this grouting gun offers both pumping precision and adaptability for a range of materials such as cement, mortar and sealant. The easy installation of the nozzles allows you to quickly switch between different tasks, optimizing your workflow. This robust pump is equipped with a double rubber piston with felt seal that is specially adapted to handle large volumes of dense grout, making it perfect for efficiently filling large joints. Use it to fill everything from stone slab joints to door assemblies and masonry. Its powerful and efficient design ensures that even the most challenging projects are handled with ease. Rectangular and circular scraper nozzles in different sizes Suitable for everything from minor repairs to large-scale construction projects Material: ABS, stainless steel, rubber, felt Size: 60 x 14 cm Size (rectangular nozzles): 57 x 16 mm, 38 x 14 mm Diameter (circular nozzles): 12 mm, 20 mm Capacity: 850 ml Included: Pump, 2 rectangular nozzles, 2 circular nozzles, sealing ring Effective joint filling Easy nozzle replacement Robust and powerful construction Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Application – Sealant set for removing silicone and acrylic joints for even joints. The jointing tool is also suitable for hard-to-reach joints, corners, and edges. Material: The silicone joint removers are made of abrasion-resistant, rubberized, and acid-resistant special plastic The joint remover set impresses with its long service life. Advantages: The silicone spatulas are chemically resistant and have good sliding properties Silicone residue can be removed from the smoothing spatula with a cloth; use acrylic water. Scope of delivery: The set includes 5 silicone joint removers and a resealable plastic box Radii and chamfers are marked on the silicone smoother for quick size determination. From spacers to decking screws to smoothing joints, My Plast allows you to achieve professional results when crafting, renovating, or modernizing. Product dimensions (L x W x H). Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

[Remove Stubborn Stains] - This tile joint cleaner tool is a cutting-edge removal hand tool, it can remove unwanted grout, mortar, thinset, caulk and surface residue, it is detail work. [Refined and Practical] - The caulking tool kit is perfect for cleaning crack tiles and getting into corners and against walls because of its smaller size, so it is cleaner than other large tools. [Save Time and Energy] - Easy to control, you can adjust your direction according to what you need to clean, so you can finish in the convenient time and helps combat fatigue while working. [Replaceable Blade] - As the tile joint repair kit contains 10pcs replacement blades, it greatly increases the durability of the hook knife and extends the service life of the knife. [Wide Range of Applications] - The removal tool is not only used to clean the dirty crack between tiles, but also can work for kitchen, bathroom balcony and the rest of the house. Description Do you want your ceramic tile to look new? And you don't need to spend too much time and effort. Tile Joint Tool can help you. The new cutter head can be replaced, which is suitable for cleaning the gaps of various tiles. And the tail adopts a curve design. It is not easy to fall off from the hand during the clear seaming process. Specifications Material: Steel head and nylon handle Precautions 1.The head of the shovel is relatively sharp and should be used with care It is best to wear gloves to avoid injury. Tile Joint Tool are not toy, please keep out of reach of children. Delivery 10 x blade 2 x handle. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Durable material: this caulking nozzle kit is made of good quality plastic, durable and reusable Mixed colors: the color of the caulking nozzle is white and the color of the caulking nozzle cap is red Size detail: each length of the white caulking nozzle is about 4.13 inch/ 10.5 cm, and the length of the red caulking cap is about 1.77 inch/ 4.5 cm Functional caulking set: extend the shelf life of the ink cartridge in use or opened, prevent the ink cartridge from hardening and reduce waste Warm notice: the nozzle can be cut into the required size to prevent the nozzle from clogging Specifications: Material: good quality plastic Colors: white caulk nozzles and red caulk caps Size(approx.): White caulking nozzles: 4.13 inch/ 10.5 cm in length Red caulking caps: 1.77 inches/ 4.5 cm in length Features: Durable and reusable Function: Prevent nozzle blockage and reduce waste Quantity: 24 pieces Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Glue mixing nozzle for AB glue mixed use, can make AB glue fully mixed evenly, light square bayonet interface, and AB glue cylinder are in close connection, the liquid canister from AB glue tube into the mixing tube, reorganization movement to mix. For50mland37mlABgun designed MA series and square bayonet mixing tube. For 50ml and 37ml AB guns designed for MA series and square bayonet mixing tube. Light square bayonet interface can be connected tightly and cartridges, the liquid from cartridges into the mixing tube. Can be applied to liquid mixing machine inanytwo, as long as the interface design is appropriate.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

[SPECIFICATION]: AB epoxy glue gun handle applicator, with mixing gun, tube capacity: 50ml.[SUITABLE FOR]: Glue gun it is suitable for 50ml combinations and is basically compatible with all standard 50ml cartridges.[USAGE]: Mixing dispenser gun can also be used with similar material kits with ratios of 2:1 and 1:1.[EASY TO USE]: 50ml AB gun can easily achieve automatic mixing and dispensing of impression material.[WIDE APPLICATION]: Used to apply a variety of two-component adhesives or coatings to solve the problem of uneven mixing of two-component adhesive products. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Description du produitProfessional silicone spatula set for flawless sealant application on various surfaces in any environment.Points forts Precision Application: Finely finished edges prevent fraying for clean, professional results every time Beginner-Friendly: Achieve perfect seals without tape or touch-ups, even for first-time users Dual-Environment Use: Works equally well with acrylic and silicone sealants in wet or dry conditions Premium Materials: Durable ABS plastic and silicone construction resists wear, solvents and surface damage Caractéristiques Material: High-quality ABS plastic + silicone Compatibility: Acrylic & silicone sealants Environment: Wet/dry conditions UtilisationIdeal for bathroom sealing, window installations, kitchen renovations and all DIY sealing projects requiring professional finishes.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less

Description du produitProfessional 6-piece silicone sealant tool set for flawless sealing with premium durability and precision control.Points forts Premium Quality: High-temperature resistant silicone ensures long-lasting performance without material damage Ergonomic Comfort: Designed handles reduce hand fatigue during extended use Easy Maintenance: Reusable tools clean effortlessly with just a damp cloth Space-Saving: Compact design for convenient storage and portability Caractéristiques Set of 6 professional-grade silicone tools Heat-resistant up to 220°C (428°F) Non-stick surface prevents sealant buildup UtilisationIdeal for kitchen renovations, bathroom caulking, window sealing, and all interior/exterior sealing projects requiring professional finishes.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.

Read more less