-
Valve for IBC tank 1000 liters 2\"/ 62 mm Integrated plastic
For 2 inch / 60 mm IBC 1000 liter water tank valves.Quick S60X6 Threaded F 2" S60X6 for 2" water tank inch 1000 liter 1000 liter.Butterfly valve is used for 1000 liter IBC tanks or other storage tanks with 2" / S60x6 external thread.Features: HDPE valve inlet seal Fasteners: Tank side: solid nut (internal thread) 2" / S60X6 mm Side outlet: threaded outlet (external thread) 2" S60X6 cap: internal thread 2" / S60X6 Note: The valve is difficult to handle at first but it will become smooth (random scene).Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$47.71 $41.49
-
10 Pieces PS5 Handle Control Adjustable Potentiometer 2k3 Resistor P5 Telemetry Repair Parts
100% brand new and high quality Features: 3-pin 2K 3 ohm rheostats, excellent replacement component. Solves the problem of creep, a blind spot, a dead spot, a dead zone or not centering after years of wear, revive your controller. Made of metal and plastic material, durable for long-term use. Compatible with PS5, ensuring accuracy and extending the service life. Easy to install these trim potentiometer sensors, you only need an electronic soldering iron and thin solder wire, you can complete the potentiometer. Specifications: Material: Metal + ABS plastic Diameter: Approx. 1.3 cm / 0.51 inch Type: 2K3 Applicable model: Compatible with PS5 controller Note: Please allow 1-2 cm error due to manual measurement, make sure you do not mind before ordering. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package includes: 10 joystick potentiometersReturns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$29.88 $25.49
-
IBC Tank Filter 1000L, 165mm Washable Nylon Water Filter, Compatible with IBC Tank Accessories
The outer casing of the IBC filter is about 165 mm / 6.49 inches black and fits most tonnages. - The IBC lid filter is made of high-quality nylon, finely processed, strong and durable, not easy to break and deform, tear-resistant and durable. - Rainwater filter lid with built-in filter bag, which can effectively filter out impurities and continuously improve water quality. It prevents sludge formation and clogging and can be reused after cleaning. To be mounted on the IBC rainwater tank. - IBC slot filter can be used to remove large amounts of dirt such as leaves and branches. Easy to empty, rinse and reuse. Installation of an IBC rainwater collection system. - The lid filter tank is attached for water purification in IBC rainwater tanks to improve long-term water quality. The IBC filter is applicable to many industrial scenarios in water treatment, metallurgy, chemical industry and many other fields.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$47.57 $41.49
-
![Check valve Foot valve Non-return valve[ca].](//www.cartoz.com.au/cdn/shop/files/V1237-ZY-203-3670-202602051701-00.jpg?crop=center&height=645&v=1776994702&width=645)
Check valve Foot valve Non-return valve[ca]
100% brand new and high qualityMaterial: BrassThread: 20/16/10mmName: 3-port check valveFunction: Prevent water backflowNotice:1. The actual color of the item may be slightly different from the pictures shown on the website due to many factors such as brightness of the monitor.2. Please allow slight manual measurement deviation for the data. Thanks for your understanding.3. 1 cm = 0.39 ''.Package includes:1 x One-way foot valve [approx.]Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$30.56 $26.49
-
45° IBC Water Filter with Lid, 163mm Nylon Rainwater Filter, Washable, Compatible with IBC Water Tank DN 150
Lid position size: Lid position 163mm, the outlet outer diameter is about 75mm. Caliber size: The caliber has 45°, 90° two-way options. Applicable scene: It is suitable for removing coarse dirt such as leaves and branches poured into a ton of water. Easy to drain, rinse and reuse. For installation on IBC rainwater tank. High quality: The hose adapter is made of plastic, acid and alkali resistant, good workmanship, sturdy and durable to use. Widely used: A variety of styles are available, widely used in chemical, pharmaceutical, food and other industries. Features: For installation on IBC rainwater tank. Specification: Size: 163mm Package includes: 1 * IBC lid filterReturns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$69.83 $60.49
-
5-Pack 9 3/4 Inch Anti-Sediment Water Filter Cartridges - 20 Micron Compatible with 10 Inch Filter_MGF
Pack of 20 micron 9"3/4 standard and anti-sediment wound pre-filter cartridges for standard 9"3/4 or 10" filter holder bowls. These anti-impurity cartridges are installed on a hot or cold water main and are ideal for filtering out solids or fine organic particles. The advantages of 9"3/4 20 micron anti-sediment wound pre-filter cartridges: Economical package, the most popular among our customers and durable. Strong and resistant mesh in the spool - no fiber residue in the water. High resistance to high temperatures. ACS certified. High quality wound polypropylene cartridges that ensure effective pre-filtration of organic contaminants, rust or dust in the water. 20 micron sediment filter spool cartridge for 9" 3/4 and 10 inch filter holders or water purifiers These cartridges are ideal for pre-filtration, placed before your water softener, or upstream of an activated carbon filter cartridge for drinking water or even to treat rainwater intended for irrigation, sanitary facilities or even your washing machine. To install this cartridge, you can equip yourself with a single filter holder or a double transparent filter holder with a 1 " or 3/4 " brass insert compatible with the standard size 9 "3/4 or 10 " available in our store. ADDITIONAL INFORMATION: These wound filtration cartridges must be replaced at least once a year. We recommend using these cartridges for water filtration or pre-filtration upstream of an activated carbon filter cartridge or ultrafiltration cartridge (membrane). It is also advisable to place a cartridge with a lower filtration threshold downstream of it (e.g. 1 micron) to properly complete the purification of your water and eliminate all remaining traces of organic matter in the water._MGFReturns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$77.73 $67.49
-
Set of 5 Spiral Water Filter Cartridges Anti-Sediment 10 Inch 254 mm - Compatible with 10 Inch Filters Made in France 5 Microns
Pack of standard pre-filtration and anti-sediment spiral cartridges 20 microns for standard 10-inch filter holders.These anti-pollution cartridges are to be installed on a hot or cold water network and are ideal for filtering solids or fine organic particles.The advantages of the 10-inch anti-sediment 20 micron spiral pre-filtration cartridge set: Economical package, the most appreciated by our customers and durable.Strong and durable coil mesh - no fiber residue in the water. High resistance to high temperatures. Made in Italy and ACS certified. High quality wound polypropylene cartridges, they provide effective pre-filtration of organic contaminants, rust or dust in the water.Sediment filter spiral cartridge 20 microns for 10-inch filter holders or water purifiers These cartridges are ideal for pre-filtration, placed before your water softener or upstream of a filtration cartridge at activated carbon for drinking water or even to treat rainwater intended for irrigation, sanitary facilities or even your washing machine.For the installation of this cartridge, you can equip yourself with a single filter holder or a double transparent filter holder with brass insert 1 compatible in standard size 10 inches available in our store.ADDITIONAL INFORMATION: These spiral filter cartridges must be replaced at least once a year. We recommend that you use these cartridges for filtration or pre-filtration of water upstream of an activated carbon filter cartridge or ultrafiltration filter cartridge (membrane). It is also advisable to place a cartridge with a lower filtration threshold downstream of it (1 micron for example) to correctly complete the purification of your water and eliminate any remaining traces of organic matter in the water.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$73.72 $63.49
-
Pvc Ball Valve, U-Pvc Plastic Valve, Straight Connectors For Flow Control And Shutoff (Φ20Mm)
General Description The PVC ball valve is designed to control water flow in irrigation and piping systems. Made of thick PVC, it ensures high durability and strength. Its two-way design allows for efficient use in various applications. Technical Specifications Material: PVC Color: Gray Connector Type: Adhesive Glue Type: Straight Two-Way Ball Valve Valve Inner Diameter: 20/25/32/40 mm Pipe Connector Size: 20/25/32/40 mm Outer Diameter Compatibility and Accessories Compatible with pipes of different diameters: 20 mm 25 mm 32 mm and 40 mm Ideal for irrigation systems and plumbing installations. Installation For optimal installation: Clean the pipe and the ball valve Apply glue to the pipe. Install the valve and hold it in place for a few minutes. Wait 2 hours for initial strength, and 24 hours before watering. Use The valve allows you to: Easily control water flow with its red T-handle Fully open or close the valve by turning the lever handle. Use in water supply, waste treatment, and industrial applications. Other information Each package contains one PVC ball valve. This product does not require a hot melt connection.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$47.01 $40.49
-
Water Pipe Tee Fittings, 25Mm X 25Mm X 25Mm, Pn16 Compression Pipe Fittings, Connectors Compatible With Pe80 And Pe100
DURABLE MATERIAL, MADE: Our water pipe fittings are made of high-quality PP using rigorous manufacturing methods, making them extremely strong and ideal for indoor and outdoor water systems, garden hoses, and irrigation systems Strict Quality Testing and Approval: This fitting has undergone rigorous quality and performance testing, passed ACS, DVGW, Wien-Zert, KIWA, UBA, OIB, ITC, and Carso safety certifications, and complies with EU norms and standards LONG-TERM PRESSURE RESISTANT: These water pipe fittings are made of high-quality raw materials and feature high-quality silicone-coated O-rings and sturdy clamping rings The metal ring ensures long-lasting performance of the female pipe fitting. Plastic Safety Fittings: These fittings feature 4-6 threaded nuts to ensure better extraction performance for a stronger pipe connection Make your work easier with the handy connector for water pipe or garden hose. STURDY FITTINGS: Our 25mm T-fittings are weatherproof, UV-resistant, and temperature-resistant and are designed to last They withstand operating pressures up to 16 bar, are safe and certified for drinking water. They are made from strong materials that will stand the test of time, can be easily installed on PE pipes used for cold water supply or agricultural irrigation, and are affordable. These compression tee accessories stand out for their quality, functionality, and affordability. Connect pipes quickly and securely. These fittings easily fit polyethylene pipes, ensuring a secure installation without the need for additional seals. They are available in diameters ranging from 16mm to 110mm to meet your different needs. Corrosion Resistant Our PP clamp ring fittings feature a sturdy black polypropylene body, durable clamp ring, pressure ring and reinforced galvanized steel ferrule to resist breakage and corrosion.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$62.79 $54.49
-
304 Stainless Steel Fully Automatic Float Valve, Automatic Water Level Controller For Water Tank, Mini Stainless Steel
General Description The 304 stainless steel automatic float valve is designed to effectively control the water level without manual intervention. Replacing traditional faucets, it offers stable performance and increased reliability, while being elegant and durable. Technical Specifications Material: Food grade 304 stainless steel Temperature range: 0-100°C Working pressure range: ≤1.0MPa Residential water pressure: 0.3~0.5MPa Compact size for space saving Compatibility and Accessories Suitable for all water storage systems: tanks swimming pools solar systems etc Filters required for the water inlet to prevent blockage by sand Installation The float valve is easy to install and does not require electricity for operation. Simple assembly allows for precise control of the water level. Use This float valve can automatically shut off the water supply when the tank is full, preventing overflow and water waste. It is perfect for domestic use in various water supply systems. Other information The robust and impact-resistant design ensures a long product life, while contributing to significant water savings thanks to its reliable operation.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$56.18 $48.49
-
2 pcs Water Tank Nozzle Valve, Water Tank Valve, Ibc Water Tank Adapter 60Mm, For Dead Ibc Tank (White)
General Description Our high-quality plastic faucet drain is designed to provide safety, stability, and durability. This product is ideal for prolonged use without quality concerns. Technical Specifications Material: Plastic Color: White Interface Diameter: 60mm Contents: 2 pieces per pack Compatibility and Accessories Compatible with most tonnage IBC tanks Suitable for special drains washing machines and kitchen sinks Installation Installation is quick and easy: just turn and tighten the nut No professional tools are required, and the installation steps are easy to follow. Use This drain hose is versatile and can be used in various settings such as: Home Garden Farm Industrial Construction Plumbing Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$54.96 $47.49
-
Washing Machine Water Supply Hose, Dishwasher Hose Extension, 3/4" Angle Dishwasher Water Inlet Hose, Universal Water
General Description This washing machine inlet hose is 3 meters long, allowing you to easily install it in the kitchen, laundry room, basement or bathroom, without worrying about the distance between the faucet and the appliance. It can also be used for extensions. Technical Specifications Hose Length: 3M Connection Accessories: 3/4 inch Connection Method: Straight connection/Angle connection Maximum Working Pressure: 10 bar Maximum Burst Pressure: 60 bar Temperature Range: 0℃ to 25℃ Compatibility and Accessories The hose is designed to connect to most washing machines and dishwashers with a standard connection Installation Flatten the gasket inside the connection. Wrap the faucet with waterproof tape to prevent leaks. Align the threads and tighten by hand without tools to avoid damaging the plastic threads. Use Use this hose to connect your washing machine to the water supply system, ensuring a durable and reliable connection. Other information It is recommended to regularly check the seals to prevent water leaks.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$56.58 $49.49
-
Dc Motor Controller, Dc 9-50V 40A Reversible Dc Motor Speed Controller To 12V 24V 36V 48V 2000W Reversible Speed Control
Higher current, high torque, forward/reverse direction You can adjust the motor speed and rotation direction. The maximum current of this governor is 40A. Power requirement: DC 9-50V / wide operating voltage range Control power: 0.01-2000W (maximum rated current 40A, long operating current up to 20A) Direction control: Toggle switch, ""I"" is forward/right, ""II"" is reverse/left, and ""0"" is STOP/brake position Product feature: Higher current, high torque, reverse direction, with brake You can adjust the motor speed and rotation direction The maximum current of this governor is 40A. Power requirement: DC 9-50V Rated current: 40A (maximum output current) Frequency: 25kHz Regulation range: 0-100% Function: forward to stop to reverse PCB size: 100mm x 76mm x 28mm Weight: 175g Control motor power: 0.01-2000W 12V: 480W (max), 24V: 960W (max) 48V: 1920W (max), 50V: 2000W (max) Notice: Make sure the positive and negative connections are correct before powering on, and the wiring should not touch the heat sink, which may burn the PCB Note that this is not a power supply module, the motor must be connected to adjust the speed, and the multimeter output will not change if the motor is not connected, and it cannot be connected to AC power. For brushed motors. Package List: 1 x DC Motor Speed Controller Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$50.60 $43.49
-
Mdpe Plastic Ball Valve - Compression Pipe Fitting With Inline Ball Valve - For Use With Water Pipe - 32Mm
Available in 1 sizes: 32mm (pipe outer diameter) Inline ball valve with MDPEE compression fittings High pressure resistance, corrosion resistance, durable valve Smooth inner surface effectively reduces water resistance Ideal for irradiation use. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$48.09 $41.49
-
Female Straight Couplings, Female Connector Accessories, Female Connecting Pipe Threads, Female Connectors, 1/2 Brass
Material: Cast brass Pipe connectors: Used to join pipes and fittings made of copper, copper alloys, steel, cast iron and many other materials 1/2 inch brass fitting: Brass fittings are very easy to use They can be installed almost anywhere in the pipeline. Application: For installation in water pipes and central heating systems Installation: Brass pipe fittings can be installed in any position on vertical, horizontal and diagonal pipes For seamless joints at threaded ends, a sealant such as hemp or Teflon sealing tape should be used. Material: Copper Size: 26*22mm Scope of application: gas and liquid media Product features: Anti-rust and anti-corrosion, sturdy and durable The main body is made of cast brass, molded in one piece and not easy to corrode or burst. The edges are smooth and burr-free. The threaded interface has a tight structure and high explosion-proof performance. Note: Due to different measurement units, the dimensional error is ± 2 mm Due to differences in light and display resolution during shooting, there may be color differences, please refer to the actual product.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$46.34 $40.49
-
Clé À Sangle Réglable Pour Filtre, 2 Clés 6/8" À Sangle De Filtre Multifonctional Poignée Outil De Retrait Pour
Efficient Work: Designed with non-slip rubber for a better grip, thickened and flexible HIGH QUALITY PRODUCTION: High-quality plastic + rubber handle, sturdy and durable, thickened rubber tactical strap Adjustable Belt: 6/8" belt wrench with rubber belt length to accommodate items of different sizes, ideal for home and workshop use HIGH QUALITY: High-quality aluminum rivets, smooth round filter bottle, durable and unpacked Occasion: Can be used in cars, tractors, oil filters, fittings, shower heads, fuel filters, bottle openers. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$55.10 $47.49
-
Plastic Ball Valve For 32Mm Compression Pipe
High pressure resistance, corrosion resistance, durable valve. Smooth inner surface effectively reduces water resistance Easy grip, replaceable handle One-piece ball valve Application: green hydroponics, agricultural irrigation, railings, creative bookcases, DIY inspired life. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$47.15 $40.49
-
Ibc S60X6 Water Tank Adapter Coarse Thread With Hose Connector Stainless Steel Valve Spout Fittings (3/4" Internal
Package: The package contains a 1" IBC water tank adapter and a 3/4" internal thread connector for the faucet or hose Please pay attention to the product specifications before purchasing. Usage: Easy and quick to install, just align the interface and screw it gently, the operation is very simple The sealing is strong, and there is no need to worry about water leakage. Can be connected to conventional PPR, PVC, metal. pipe valve, hose, stainless steel valve etc. High quality: Made of high quality plastic and stainless steel, sturdy and durable, anti-pressure and no leakage Non-toxic, environmentally friendly and safe to use. Wide range of applications: garden irrigation, IBC water tank, aquarium, barrel valve, industrial and agricultural production, etc Large caliber containers can be equipped with threaded pipes, hoses, faucets and other accessories Product flexibility: S60X6 coarse thread female adapter (inner size 60 mm) for internal sealing of IBC connection. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$50.25 $43.49
-
1/2 Pt Sleeve Electric Water Boiler Safety Valve 0.75Mpa Temperature And Pressure Relief Valve For Water Heater System
Pressure: 0.75 mPa Product Name: Water Heater Electric Return Valve; For: Electric Water Heater; Color: Red and Silver Material: Metal, Plastic Weight: 78 g External Thread Size: 20 mm/1/2 PT; Internal Thread Diameter: 19 mm/1/2 PT Hole Diameter: 4.5 mm Overall Dimensions (L x W x H): 45 x 25 x 61 mm Package Contents: 1 x Water Heater Electric Return Valve Note: Due to lighting and screen settings, the color of the item in the photos and the actual product may be slightly different The size of the item may vary by +/- 1-3 cm.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$46.61 $40.49
-
Water Filter With Filter Insert For Pressure Washers 4.730-059.0 - 3/4" Fitting For K2 To K7 - 3 Pack
Water filter to protect a pressure washer pump from particles contained in the water. Stops particles from entering the pump. Suitable for Karcher K2 K3 K4 K5 K6 K7, also for Lavor Elitech Champion Nifisk pressure washers. Suitable for all types of Karcher pressure guns for home and garden. Connection: 1.9 cm Color: as the picture Dimensions: about 11.7 x 5 cm Maximum pressure: 12 bar Maximum temperature: 60 ° The water inlet filter protects pressure washer pumps, prevents dirt particles from dirty water. Inlet G3/4, outlet G3/4, maximum pressure 12 bar. Fully removable and cleanable, ready to use again and again. Provides clean water to the pump and increases the life of the machine. Fits into the machine's water inlet hose connector. Compatible with all Karcher K2 - K7 pressure washers Large filtration volume. As long as your pressure washer's water inlet is 1.9 cm, you can use this water filter. Pressure washer water filter, fits almost all brands of pressure washers,. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$55.23 $47.49
-
Switching Power Supply 12V 20A LED Transformer 240W Switching Power Supply Ac 110V / 240V Dc 12V Switching Converter
Input voltage range: AC 85-265V Output voltage: DC 12V 20A The maximum power is 240W. Premium Material: The shell of the 12V 20A switching power supply is made of durable aluminum The internal coil of the 12V transformer is made of pure copper coil, and the service life is more than twice that of aluminum wire. The 12V LED transformer has good conductivity, high efficiency and no noise. Quadruple Protection: 12V 20A power adapter provides overload, overvoltage, overcurrent and short circuit protection Excellent drive with built-in safety device to ensure safety and stability. Scope of application: 12V 20A power supply suitable for LED strip lights It is also suitable for security monitoring, routers, displays and audio devices with the same current and voltage.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$69.98 $60.49
-
Ibc Lid Filter - Rainwater Filter - Washable Nylon - With Lid - 165Mm - 245Mm - Water Filter - Rainwater Tank Accessory
Durable Materials: The IBC lid filter is made of high-quality plastic and the nylon filter cloth for durability and good workmanship 【Reusable】Rainwater filter lid with built-in filter bag that can effectively filter impurities and continuously improve water quality. Prevent sludge formation and clogging. They can be reused after cleaning. 【Efficient Filtration】The built-in filter bag can be emptied, remove excess dirt, organic waste and other particles, and reduce ammonia density. At the same time, easy to empty, rinse, and reuse. Caliber Size: The lid size is about 165mm/245mm, suitable for most tons There are many models to choose from. Wide Range of Applications: The lid filter container for water purification in IBC rainwater tanks is fixed to improve long-term water quality It can also be widely used in chemical, pharmaceutical, food and other industries.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$60.63 $52.49
-
Pwm Dc Motor Speed Controller (Pwm) Dc 6-60V 12V 24V 36V 48V 30A Adjustable Speed Motor Speed Regulator With ROtary Knob
【Durability】: This PWM motor speed controller is made of high-strength PCB board material, which has good durability and wear resistance 【Easy to Install】: This motor speed controller adopts screw terminals, the wiring is convenient and fast, and it can be controlled easily and conveniently 【LED Display】This DC motor speed controller is designed with a digital display that can show the percentage of actual speed to maximum speed, so you can easily read the data through the LED display. 【Wide Input Voltage Range】: This PWM DC motor speed controller supports a variety of input voltages from DC 6V to DC 48V, and is suitable for 12V 24V 36V 48V power supply, while the output current is 0A-30A, which ensures a wide range of output voltages 【Stable Performance】 This easy-to-use motor controller has stable performance, with instant start/stop switch and speed control potentiometer, easy to use. Product Specifications: With rotary knob Size: about 3.78 x 2.40 x 1.34 inches Input voltage range: DC6V-60V Output voltage: linear load Output current: 0A-30A Continuous current: 20A Speed range: 0%-100% Adjustment method: potentiometer Control type: control current Control frequency: 15 KHz Wire type: screw terminal The speed controller is made of high-quality circuit boards to ensure a longer service life This easy-to-use DC motor speed controller offers stable performance. It uses a digital display design to show the percentage of actual speed to maximum speed. Therefore, the data can be read through the LED display and accurate data can be obtained easily. The motor speed controller uses screw terminals for quick and convenient wiring. Equipped with an instant start/stop switch and a speed control potentiometer.. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$39.11 $33.49
-
5V Dc Relay Module ４ Channels With Optocoupler ４-Channel Relay Module For Mega 2560 1280 Dsp Arm Pic Avr Stm32
This relay module is 5V driveable, It can drive maximum 10A under 250V AC and 10A under 30V DC Standard interface can be directly controlled by microcontroller Indicator light to indicate whether the relay is conducting or not to work safely The 4 channels have its own interface which can be directly controlled by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, ect. This makes it possible to control various devices and equipment operating with high currents Widely used for all MCU control, in the industrial sector, PLC control, home automation 8 Channel DC 5V Relay Module with Optocoupler Available switching capacity of 10A despite the small size design for high density PC. PCB mounting technique. UL, TUV recognized. Selection of plastic material for high temperature and better chemical solution performance. Sealed types available. Simple relay magnetic circuit to meet the low cost of mass production. Widely used for household appliances, office machine, audio, equipment, automobile, etc. (Remote control TV receiver, monitor display, audio equipment high current use application.) Product Discription: Product Name : 8 Channel Relay Module; Output Channel : 8 Power Supply : 5V; Load Voltage : AC 250V 10A, DC 30V 10A Total Size : 137mm x 56mm x 17mm / 5.4" x 2.2" x 0.7" (L*W*H); Mounted Hole Size : 3mm / 0.12" Mounted Hole Center Distance : 132 x 50mm / 5.2" x 2" (L*W); Material : Electrical Part Weight : 122g; Package Content : 1 x 8 Channel Relay Module Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$48.23 $41.49
![Check valve Foot valve Non-return valve[ca].](http://www.cartoz.com.au/cdn/shop/files/V1237-ZY-203-3670-202602051701-00.jpg?crop=center&height=645&v=1776994702&width=645)
You have seen 240 out of 627 products