DS18B20 Waterproof Temperature Sensor: The probe chip whose pins are separated by heat shrink tubing can prevent short circuits. Temperature range: This DS18B20 temperature sensor has a temperature range of -55 ~ +125 °C.Note: The wire can only withstand a high temperature of about 85 °C. Product parameter: Power supply 3.0V - 5.5V, Output cable: Red (VCC), Yellow (DATA), Black (GND). Material: The digital temperature sensor has a waterproof design, high-quality stainless steel packaging, moisture-proof and rust-proof, suitable for a variety of digital temperature measurement and control equipment in confined spaces. Wide Application: This waterproof DS18B20 temperature sensor is suitable for thermostat control, industry, thermometers, all thermal systems, etc.This is suitable for refrigerators, warehouses, tanks, telecommunication rooms, power rooms, cable ducts, etc. Range: 2 meters / 6.5 feet Color: Black Material: Stainless steel Package Contents: 5 x Temperature Sensor Only the above package contents, others are not included. Note:Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3cm.Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
The INA226 is a current-voltage sensing and power measurement device with an I2C or SMBUS compatible interface. The device monitors both the voltage drop across the shunt and the bus voltage. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, allow for direct readings of current in amps and power in watts.The INA226 senses current on common bus voltages that can range from 0 V to 36 V, of the supply voltage. The device operates from a single 2.7 V to 5.5 V supply and typically draws 330 A of supply current. The device is specified over the operating temperature range of -40°C to 125°C and has up to 16 programmable addresses on the I2C-compatible interface.CJMCU - 226 - supports alarm function for 36 V, bidirectional, high-precision, low-side and high-side power measurement, I2C output current.The highest INA226 interference voltage of 10 microvolts (uV), the largest gain error is 0.1%, the accuracy is 10 times higher than industry-leading competitive products. This device is a complete 16-bit single-circuit solution, to number the I2C interface for current, voltage and power to provide comprehensive programmable measurement.INA226 for servers, computers, telecommunications equipment, power line equipment and test equipment design personnel with great advantages, can fully meet the requirements of accurate power measurement.The factory print batch number is different.Color: BlueMaterial: PCBPackage Contents:5 x Current Monitoring Sensor Module5 x PinOnly the above package contents, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowable error is +/- 1-3 cm.Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Measure precisely with dual function—laser and steel tape in one.
Specifications:
Dimensions: 4 cm x 8.5 cm x 8.2 cm
Laser Range: 100 cm
Steel Tape Length: 500 cm
Material: Acrylonitrile Butadiene Styrene
Battery Type: Alkaline (not included)
Power Source: Battery Powered
Laser Output: <0.4 mW
Laser Type: Non-portable
Benefits:
Dual measuring modes: 100m laser range + 5m steel tape
Compact, durable ABS build for daily jobsite or home use
Easy, battery-powered operation with no cords or plugs
Product Description:The Laser Rangefinder Steel Tape Measure combines two essential measuring tools into one compact device. With a 100-meter laser range and 5-meter steel tape, it covers both long-distance and detailed measuring tasks efficiently. Designed for accuracy and user convenience, it runs on alkaline batteries and offers a robust ABS body for lasting performance. Perfect for contractors, builders, and DIY users, this device eliminates the need to carry separate tools. Its non-portable laser emits <0.4 mW power for safety and precision. For exact physical sizing, please refer to the image under the dimensions section.
Â
High accuracy, fast readings. Widely used, easy to use. No need for batteries, durable. Food grade stainless steel, safe and environmentally friendly. Application: This product can be used to measure the temperature of compost soil. Descriptions: Hermetically sealed to avoid fogging and moisture. But do not suggest leaving outdoors day and night, as it is the measurement and can take care of it for long-term. Robust construction. Tough, reinforced welded between dial and spindle for long-term operation Long quality stem, durable spindle for accurate readings Take the shaft to push in and pull out. Color: silver Diameter: 48mm Length: 500mm Material: Food grade stainless steel Temperature range: 0-120 How to use: direct insertion of the probe Package Contents: 1 x Compost Soil Thermometer Only the above package contents, other products are not included. Note: Light and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3 cm.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
The measuring range is 0-120°C. Designed to measure liquids, mainly water temperature. Remote reading with capillary tube. The sensor is made of brass, better thermal conductivity than iron or steel. Dial Thermometer, Capillary Meter, Temperature Meter, Sensor 0-120°C, Water Temperature Measurement Specifications: Measuring range: 0-120°C Graduation: 2°C Measurement accuracy: (+/-)2% < p>Capillary length: 1m Sensor head size: Length: 34mm, Diameter: 6mm Thermometer size: Diameter: 5.5cm / 2.16in Thermometer weight: 50g / 1.78oz Package size: 6.8 x 6.8 * 7.2cm / 2.67 * 2.67 * 2.83in Package weight: 71g / 2.5ozReturns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
Never trip over wandering brooms and mops again! With these handy, self-adhesive clamps, you can create a tidy and organized home in no time.
VALUE-PACKED SET OF 4: You'll receive four pieces right away to give all your loose handles, from the kitchen broom to the shed rake, a neat place of their own.
NO-DRILL INSTALLATION: Forget the drill! Thanks to the strong self-adhesive backing, you can easily attach these holders to any smooth surface. Simply clean, stick, and you're done!
SMART SECURE GRIP: The holder automatically clamps onto any handle. The anti-slip inner side ensures an iron-strong grip, so your tools won't slip down unexpectedly.
MULTIFUNCTIONAL SPACE-SAVING: Ideal for kitchen cupboards, pantries, garages, or sheds. Hang your mop, broom, dustpan brush, or small garden tools to keep your floor clear.
Versatility
A Solution for Every Space
These compact and stylish holders are perfect for:
- The kitchen: For the mop or broom.
- The bathroom: For the floor wiper.
- The garage or shed: For (garden) tools with a handle.
- The meter box or storage cupboard: The perfect place to store cleaning supplies out of sight.
Specifications
Product: Self-Adhesive Broom Tool Holder
Quantity in package: 4 pieces
Material: Durable, high-quality plastic (ABS)
Fixing: Self-adhesive (no drilling required)
Colour: White
Create peace and order at home. Order this handy set of 4 today and enjoy a perfectly organized space!
Returns, Refunds, and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Working with wire takes a lot of precision. With this bootlace ferrule crimping tool from Randy Travis Machinery, you'll have the edge in any electronic project.
Its ergonomic design and lightweight construction make the tool perfect for easily crimping wires in bootlace ferrules. This four-sided crimper works with several ferrule sizes and comes with 1,200 ferrules in varied sizes, all with plastic ends for easier access.
Ferrule sizes range from 0.5 to 10.0 square millimetres, but the crimping tool can also handle ferrules in an even smaller size, 0.25 square millimetres. It comes in a no-welding design for extra ease of use. Make working on your next electronic project go easier. Buy this crimping tool and ferrule set today!
Features and specifications:
Colour: Red, blue, and black
Quantity (ferrules) 1,200 pieces
Capacity: 0.25-10.0mm2
Material: PVC, copper, and tin plating
4-sided crimping
Ferrule terminals enclosed in plastic for easier access
Ferrule sizes and quantities:
1,0.5mm2(200)
2,0.75mm2(200)
3,1mm2(200)
4,1.5mm2(250)
5,2.5mm2(250)
6,4mm2(50)
7,6mm2(25)
8,10mm2(25)
Note: COM (change of mind) Return Policy: The product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.
This Randy & Travis Machinery Security Lock Hardened Steel Fixed Staple Hasp provides added security to sheds, outbuildings, cycle shelters, pool doors, gates, doors and anywhere else that needs protection. Indoors, use this all-purpose security measure to fasten cupboards, interior doors or even the 'fridge!
The design makes it ideal to fasten around corners as well as suitable for a straight surface.
The staple/hasp combo can be secured using a padlock to give a durable security solution that's designed to resist sawing, cutting or otherwise being interfered with.
Made from hardened steel and boron, this is a security classic that when paired with a good-quality padlock acts as a good deterrent to unwanted access. Durable fixings are included, ensuring there are no weak points in this piece of security. This product is resistant to damage or deterioration from water, UV light or extreme temperatures. It's also suitable for indoor or outdoor use.
Features:
Fixings are included
Durable hardened steel/boron construction
Ideal for securing around a corner or awkward angle
Suitable for indoor or outdoor use
Specifications:
Dimensions: Assembled length is 15.9cm/6.25in
Material: Hardened steel with hardened boron alloy staple
Suitable for padlock diameters or similar security measures up to 1.1cm in diameter
Note: COM (change of mind) Return Policy: The product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.
Define your parking spots and protect your landscaping, sidewalks, and walls with this heavy-duty rubber parking curb by Randy Travis Machinery. Six feet in length and done in high-contrast yellow and black, it's highly visible to drivers, even at night. Crafted in weather-resistant rubber, this curb withstands extreme weather conditions as well as oil, petrol, UV light, and moisture.
Although it is rugged, this parking curb retains rubber's flexibility so it can conform to uneven pavement conditions and protect your customers' cars in case of accidental hits. Unlike concrete, this rubber parking curb won't crack, chip, corrode, or crumble. And, in contrast to concrete, you can use it for temporary parking spaces as well as permanent ones.
Use it in parking lots or garages for a permanent feature or at events for temporary parking. Light in weight, this parking stop is easily movable when you remodel your parking spaces, unlike concrete that requires demolition. Made from recycled rubber, these parking curbs reduce waste in landfills while serving a practical purpose. Order yours today!
Features and specifications
Dimensions: 182.88 x 15 x 10.16cm (L x W x H)
Weight: 12.93kg
Colour: High-contrast, high-visibility yellow and black
Material: Durable recycled rubber
Installation: Comes with pre-drilled 12.7mm holes for no-hassle installation in permanent sites (hardware not included)
Resists UV, petrol, moisture, weather, and oil damage
Flexible to protect vehicles and conform to uneven surfaceseven gravel
Easy installation
Suitable for parking lots, garages in both permanent and temporary installations
Note: COM (change of mind) Return Policy: The product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.
10pc Heavy Duty Steel C-Clamps 6 Mig Welding Locking Plier Vice Grip
FEATURING:
10 x 6'' (150mm) in Length C - Clamps
Simply Turn Screw to Adjust Holding Pressure
Guarded Release Trigger for Quick Un-Locking
Swivel Pads On Clamp Tips For Uneven Surfaces Odd Angles
Nickel Plated Finish
Heavy Duty Design
Excellent Quality
Note: COM (change of mind) Return Policy: The product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.
The Baumr-AG 70L mixer is perfect for concrete, mortar, or render. Not only will the easy-load design save your back, the dual fast-mix blades ensure the Baumr-AG 70L will produce a consistent, stable mix every load. Save time not having to wait for an over-wet mix to set or the labourious task of potentially having to redo a job due to inconsistencies of a poorly mixed through batch of cement.
Make no mistake, Baumr-AG are the online industry leaders with unparalleled quality comparable to that of mixers retailing for more than $700 - a bold statement backed up by an extensive 1 Year Warranty!
With a vast positional locking tipping range for an easy pour, a solid reinforced frame for ultra-durability and full IP55 rated controls, the Baumr-AG 70L cement mixer is the ultimate tradesman's choice.
Do you demand speed and top results every time? Purchase the Baumr-AG 70L today and get pouring!
Specification
Power: 220W
Material: Drum - Heavy duty steel
Product Type: Cement Mixers
Capacity: 70L
Drum Diameter: 460mm
Drum Mouth: 240mm
Drum Speed: 27.5rpm
Ring Gear: Punched
Weight: 25kg
Packing Size: 59x57x37cm
Loading qty per 20ft: 240
Loading qty per 40ft: 204
Loading qty per 40HQ: 588
Package: Paper clip packing + 7 layer cardboard
Wheel: As per factory default
Mortor: aluminium with copper coated wire
Gear: nodular cast iron
Power Plug: Australian Standard
IN THE BOX
1x Baumr-AG concrete mixer
1x User's manual
WEIGHT & SIZE
Package Size (L x W x H):58 x 57 x 36 cm
Gross Weight:24kg
SKU: CONMIXBMRA7X0
We accept Change of Mind returns for 14 days after you have received the item in cases where you have changed your mind or made an incorrect purchase and wish to return the product. This also applies to orders cancelled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Deductions may apply including Initial and Return Shipping, as well as restocking fee of 10% of the product price
100% brand new and high qualityDurable and easy to useSHTC3 Temperature and Humidity Sensor Module DigitalSize: 23.7x12.5mm / 0.92x0.49inColor: WhiteSpecification:Humidity measurement range: 0~100%RHHumidity measurement accuracy: 2%RHTemperature measurement range: -40~125CTemperature measurement accuracy: 0.2 CWorking voltage: 3.3~5VDCI2C interface outputSize chart:Size: 23.7x12.5mm / 0.92x0.49inPackage includes:1 pc sensor moduleNote:Please allow 1-3mm measurement deviation due to manual measurement.Due to the different monitor and light effect, the actual color of the item may be slightly different from the color shown on the pictures.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
The INA226 is a current-voltage sensing and power measurement device with an I2C or SMBUS compatible interface. The device monitors both the voltage drop across the shunt and the bus voltage. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, allow for direct readings of current in amps and power in watts. The INA226 senses current on common bus voltages that can range from 0 V to 36 V, of the supply voltage. The device operates from a single 2.7 V to 5.5 V supply and typically draws 330 A of supply current. The device is specified over the operating temperature range of -40°C to 125°C and has up to 16 programmable addresses on the I2C-compatible interface. CJMCU - 226 - supports alarm function for 36 V, bidirectional, high-precision, low-side and high-side power measurement, I2C output current. The highest INA226 interference voltage of 10 microvolts (uV), the largest gain error is 0.1%, the accuracy is 10 times higher than industry-leading competitive products. This device is a complete 16-bit single-circuit solution, to number the I2C interface for current, voltage and power to provide comprehensive programmable measurement. INA226 for servers, computers, telecommunications equipment, power line equipment and test equipment design personnel with great advantages, can fully meet the requirements of accurate power measurement. The factory print batch number is different. Color: Blue Material: PCB Package Contents: 5 x Current Monitoring Sensor Module 5 x Pin Only the above package contents, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowable error is +/- 1-3 cm. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
DS18B20 Waterproof Temperature Sensor: The probe chip whose pins are separated by heat shrink tubing can prevent short circuits. Temperature range: This DS18B20 temperature sensor has a temperature range of -55 ~ +125 °C.Note: The wire can only withstand a high temperature of about 85 °C. Product parameter: Power supply 3.0V - 5.5V, Output cable: Red (VCC), Yellow (DATA), Black (GND). Material: The digital temperature sensor has a waterproof design, high-quality stainless steel packaging, moisture-proof and rust-proof, suitable for a variety of digital temperature measurement and control equipment in confined spaces. Wide Application: This waterproof DS18B20 temperature sensor is suitable for thermostat control, industry, thermometers, all thermal systems, etc.This is suitable for refrigerators, warehouses, tanks, telecommunication rooms, power rooms, cable ducts, etc. Range: 2 meters / 6.5 feet Color: Black Material: Stainless steel Package Contents: 5 x Temperature Sensor Only the above package contents, others are not included. Note:Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3cm.Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
Features:Brand new and high qualityCurrent sensor chip: ACS712ELC-05/20/30;Pin 5V power supply, built-in current indicator;The module can measure positive and negative 5/20/30 amps, corresponding analog output 185m/100m/66m V/A;There is no sensitive current passing, the voltage output is VCC/2;PCB board size: about 31 (mm) x13 (mm) /1.22x0.51in Specifications:Module: ACS712Material: PCB boardSize: about 31 (mm) x13 (mm) /1.22x0.51inType: 5 A /20 A / 30 A (Optional)Quantity: 1 pc Note:ACS712 Hall detection is based on the principle, try to avoid using the magnetic field caused by the influence of thisPlease allow 0-1cm error due to manual measurement. Please make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks Package includes:1 pc x ACS712 moduleReturns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
Measuring Range: Extra-long, 1.5-meter extendable tape measure, perfect for sewing, crafting, and body measurements. Portable Design: Compact and lightweight construction with a retractable mechanism, ideal for travel and storage. Double-Sided: Suitable for both inches and centimeters for a variety of measuring options. Easy to Read: Clear and bold markings on a white background ensure accurate measurements. Durable Construction: Soft yet strong fabric tape measure with reinforced ends prevents wear and tear and extends product life.
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
With molded hooks to allow the level to be hung on a builder's line.
Suitable for masonry, plumbing, guttering and tiling.
Can be used with a hanging spirit level.
Made with fine workmanship, practical and extremely beautiful High precision and ease of use for fast and accurate reading The use of special acrylic and ABS materials, so that it is as clear as crystal, horizontal direction at a glance.
Specification: Measuring range: 10 (mm) Accuracy: 30° Scope of application: photo frame level, site straight line level Package size: 11 * 8 * 2cm / 4.3 * 3.1 * 0.8in Weight: 30g / 1.1oz (approx.) Package list: 5 x Rope Line Level
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Made of quality materials, waterproof, moisture-proof and rust-proof.
Wide measuring temperature range from -50 to +110.
High accuracy, sensitive and reliable.
1M cable length, for remote measurement and control of temperate temperature.
Wide applications, it can be used in temperature measurement of aquarium, household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
Specifications: Type: NTC 10K / B3435 Color: Black Length: 1M, 2M (optional) Measuring Temperature Range: -50 to +110 Measuring Accuracy: ±1 Connector: XH2.54-2 Pin Plug Package Size: 100 * 60 * 30mm / 3.94 * 2.36 * 1.18in Package Weight: * 1M: 8g / 0.28ounce
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Material: Aluminum AlloyGood Quality: This finger sizer is made of durable metal material, not easy to damage, can use for a long time.3 scales are easy to read and help you find the right size: UK sizes D to Z+5, US sizes 1-15 and EU sizes 41-76.This professional tool kit allows you to get an accurate size of your finger and rings
Perfect for engagement, wedding and jewelers etc.If you are not satisfied with the product, please contact us, we will provide you with the best solution..
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
General Description
The feeler gauge is made of stainless steel and includes 32 blades of different thicknesses.
Foldable, it is easy to carry and store, making it a practical tool for various uses.
Technical Specifications
Material: Stainless Steel Number of Blades: 32 Thicknesses (mm): 0.04
0.05
0.06
0.08
0.10
0.13
0.15
0.18
0.20
0.23
0.25
0.26
0.28
0.30
0.33
0.35
0.38
0.40
0.43
0.45
0.48
0.50
0.53
0.55
0.58
0.60
0.63
0.65
0.70
0.75
0.80
0.88 Thicknesses (inches): 0.0015
0.002
0.0025
0.003
0.004
0.005
0.006
0.007
0.008
0.009
0.010
0.011
0.012
0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.020
0.021
0.022
0.023
0.024
0.025
0.026
0.028
0.030
0.032
0.035 Compatibility and accessories This gauge is ideal for auto/motorcycle mechanics
electronic products such as 3D printers
as well as musical instruments such as guitar
acoustics and bass
Installation
No installation required, simply unfold the gauge to use it as needed.
Use Use the gauge to measure: Spark plug gap Valve rocker clearance Adjustments on various electronics and musical instruments Other information The gauge cover is treated with anti-rust oil to prevent corrosion
All sizes are etched on each blade for easy identification..
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Calibration and deburring For multilayer tube diameter 16, 20 and 26 mm For quick and clean calibration This tool allows you to restore the cylindrical shape to the tube after cutting, and to roughen the end of the tube with a diameter of 16 mm, 20 mm, 26 mm.
This allows you to insert the fitting without risk of cutting the sealing O-rings..
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
Thermomanometer 80mm pressure gauge temperatura thermometer boiler heating radial thread (80mm 0-16bar 1/4") Range: 0 ~ 120 ℃
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
【Small and Portable】 The size of the spirit level is 58 x 43 x 13mm which is easy to carry and install on different measuring tools 【Easy to Use】 The level has two small holes for easy attachment to measuring tools.
2-way level can level both planes of most surfaces.
【Accurate Measurement】 The T-shaped level allows rotation to compare and display the measurement accuracy and two yellow-green fluorescent vials are good for providing accurate measurement 【Sturdy and Durable】 The spirit level is made of a hard plastic base and the two-level bubbles are protected by plastic rings 【Wide Range of Uses】 The small T-shaped level is suitable for leveling RVs and is also suitable for leveling telescopes, cameras and other tools mounted on tripods 2-way T-shaped spirit level for setting the angle level.
Features: Screw holes for easy mounting to tools or work surfaces
Multi-purpose, 2-way level can level both planes of most surfaces.
2 fluorescent yellow-green acrylic vials help provide accurate measurements.
The T-shaped spirit level allows you to check accuracy by rotating the level to compare the indicated measurements.
T-levels can be used when leveling telescopes, cameras, or other tripod-mounted devices.
Very useful level tool when leveling your RV or items in your RV.
Use this precise cross-check level to adjust machine tools, scales, pool tables, telescopes and transits, furniture, and photo/video equipment.
Levels can be attached to the tongue or rear bumper of a trailer or RV to check level.
Package Contents: 1 x T-shaped spirit level
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
High Quality: The combination square is made of high quality stainless steel and zinc alloy, 2mm thick ruler makes it very sturdy and durable, laser engraved numbers increase readability and protect against wear
Accurate Measurement: Built-in spirit level, which makes readings more accurate, laser engraved numbers increase readability and protect against wear
One side in centimeters and another side in inches: 300mm metric system and 30.5cm British system
Meet your different measuring needs.
Multifunctional: The combination square is a good helper for woodworking and can be used as a square, depth gauge, scriber and level
It is suitable for measuring lengths, widths, depths, heights, 90 degree angles, 45 degree miter angles and scribing.
Additional Accessories: Self-adjusting knurled nut easily aligns measurements, spring-loaded brass bolt to ensure accuracy, brass tip that stores in the handle for quick and easy marking.
Returns, Refunds and Replacements
Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery Timeframe
Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:
For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.
