-
Carbon Brushes for Bosch Angle Grinder 15x8x5mm 20pcs Replacement Compatible Power Tool Repair Parts
[Application]: Compatible with Bosch angle grinder. [Dimensions]: 15x8x5mm/0.59x0.31x0.20in. [Package List]: 20x Carbon Brushes, other accessories are not included. [Durable Material]: Made of good quality material, sturdy and durable, great for replacing your old or worn out ones. [Note]: Please confirm the size before ordering. Please allow 1-2mm error due to manual measurement.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$31.44 $27.49
-
HSS Step Drill Bits Ø 6-60mm for Metal Wood Plastic Spiral Cone Drill
Large Step Drill - The step drill is designed in 12 steps of drill diameter: 6-60mm (6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm). Unique enlargement holes, no need to change drill and positioning holes during use. Material - The step cone cutter is made of HSS 4241 high-speed steel and titanium coating on the surface. Anti-rust, anti-wear and heat, longer service life. Spiral design - 135 split tip and 2-groove double-edged design ensure faster and smoother cutting, stable removal and better chip removal. Three-sided shank fits securely in the chuck of power tools and prevents slipping. Surface depth gauge makes drilling accurate. Water-cooled - For workpieces with hardness below 25°; For materials such as metal, wood, aluminum alloys, plastic plates, insulation boards, etc. What you get - 1 x Twist drill. Recommended drilling speed 250-400 rpm. Note: The data are all manual measurements, please allow 1-3 cm error; due to the difference in light and display, there may be a certain color difference, please refer to the actual item received. Guaranteed customer service: If you have any problems, please do not hesitate to contact us! Our customer service team is here to help you quickly . Fast delivery: We will process and ship your order as soon as possible . However, due to exceptional circumstances (holidays, extreme weather, high demand, etc.), a slight delay may occur. In this case, we will keep you informed as soon as possible . Quality guarantee: Your satisfaction is our priority! We are committed to providing you with quality products for a worry-free purchase . Thank you for your trust and support . We look forward to offering you an exceptional shopping experience! Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$75.51 $65.49
-
Router Collet Set of 6 - 6mm 6.35mm 8mm Countersunk Milling Chuck Collet Adapter
Hole diameters: 6mm/6.35mm/8mm, 3 sizes available to meet different needs. Comes with 2 nuts. High-quality materials: The engraving and cutting machine chuck is made of carbon steel, which has high flexibility and wear resistance. Fine workmanship and stable performance, portable and easy to use. High-precision clamping, firm and stable, improving work efficiency. The router collet is suitable for engraving on wood routers, cars, molds and mechanical engineering. It is the ideal tool for engraving machines and wood routers.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$36.53 $31.49
-
Diamond Hole Saw 100mm with Centering Drill Tile Cutter
Diamond Hole Saws: Made of carbon steel and equipped with a diamond core drill, they are ideal for drilling in tiles, porcelain, glass, marble, ceramics, etc. Drill a Precise Hole: The pilot centering drill design avoids slippage problems and makes it easy and precise to drill holes in tiles. Longer Life: The thick and smooth diamond coating ensures superior performance. The large clearance hole on the side allows water to cool the hole saw and remove chips faster. Instructions for use: Continue drilling vertically, once a round groove is drilled, you can remove the centering drill and continue drilling. Keep the rotation speed between 500 and 800 rpm and use water to ensure the cooling of the saw.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$69.47 $60.49
-
2-Pack Copper Pipe Cleaning Brush, Full-Metal HVAC Pipe Cleaning Brush for Drill Power 1/4in Shaft
Wii to HDMI Converter Adapter with 1.5m High Speed Conversion CableReturns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$57.68 $49.49
-
Step Drills Double Groove Countersink Drill High Speed Steel Cone Drill for Steel Wood, Plastic, Brass, Aluminum 3 pcs
High Quality: The step drill set is made of high speed steel and with titanium coating to reduce friction and heat, has strong durability. Which is smoother and has no resistance than straight groove step drills and chip removal is faster. Step Design: The hexagonal shank taper drill set adopts step cutting design which makes the cutting faster and smoother, which not only increases the cutting speed but also prevents the spiral step drill from slipping during operation, saving time and energy. Package Includes: You can get 3pcs step drills. Our high speed steel titanium drills include 3 sizes, 6.5cm, 7.5cm and 7.8cm, with a plastic bag for easy storage, meeting your needs for different hole diameters when processing. Easy to Drill: Drilling power tools prevent slipping, quickly remove chips, low pressure, drilling and cutting are faster and smoother, it can be faster, more stable and smoother cutting. Improve your work efficiency. Wide Application: Our cone drill bit is suitable for drilling holes in a variety of materials, including steel, wood, plastic, aluminum, copper, drywall, metal and PVC, etc. car or home. Ideal for professional and home use. Step Drill Bit Set High Speed Steel Titanium Coated Cone Drill Bits -Our step drill bit set has a serrated surface, which makes the drill bits not easy to become dull. -Hexagonal shank cone drill bit set fast cutting speed, strong practicality, easier work. -The cone drill bit can be installed firmly in the chuck of the power tool and eliminate slippage. -The step drill bit set can be used for chamfering, stainless steel sheet and aluminum alloy. -High speed steel titanium coating drill bits ensure exceptional durability and sharpness, can reduce friction, run cooler. Specification: Material: High Speed Steel Color: Gold Size: 11x8x2CM Weight: 90G Quantity: 3pcs Package includes: 3 X Step Drill Warm Tips: 1) Due to the light and screen setting difference, the item's color may be slightly different from the pictures. 2) Please allow slight dimension difference due to different manual measurement. Your satisfaction is our greatest pursuit, please feel free to contact us if you have any questions. We will reply you within one working day.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$31.82 $27.49
-
HSS Step Drill Conical Metal Drill Bit 4-32mm for Screwdriver on Steel Wood Plastic
HSS Step Drill Bit - - Our step drill bit is mainly designed for drilling in wood and steel, including metals, aluminum, wood, plastic, etc. Superior Material - - Titanium coated 4241 (HSS) high speed steel reduces friction. They are more durable than uncoated drill bits and HSS (high speed steel) has a long service life. Multifunctional - - According to the need to process holes of different diameters, no need to change drill bits and hole positioning, double cutting blade design for faster cutting, automatic deburring of the hole when drilling. Usage - - 4mm precision holes can be drilled to 32mm holes of different sizes. Suitable For - - Drilling tools, bench drills. Working in water cooling can effectively extend the life of the drill bit. Feature - This drill bit is made of high quality HSS steel and with titanium coating to reduce friction and heat. - Suitable for drilling holes in a variety of materials, including steel, brass, wood, plastic, etc. - No pilot holes or pre-drilling required, and automatically deburrs holes when drilling. 2 fluted edges for faster, smoother cutting. - According to the need to process holes of different diameters, you can achieve spot processing of large holes, no need to change drills and hole positioning. - Tool use: drilling, bench drill. Working in water cooling can effectively extend the life of the drill. Specification - Material: Made of 4241 high-speed steel - Handle: 10mm triangular round handle - Surface treatment: nitrogen treatment - Spiral groove drill scale 4-32mm - Scale: 4,6,8,10,12,14,16,18,20,22,24,26,28,30,32mmReturns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$38.46 $33.49
-
HSS Step Drill Ø 6-60mm - Spiral Large Cone Drill for Metal, Wood, Plastic..DEBUNS
Large Step Drill - The step drill is designed in 12 steps of drill diameter: 6-60mm (6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm). Unique enlargement holes, no need to change drill and positioning holes during use. Material - The step cone cutter is made of HSS 4241 high-speed steel and titanium coating on the surface. Anti-rust, anti-wear and heat, longer service life. Spiral design - 135 split tip and 2-groove double-edged design ensure faster and smoother cutting, stable removal and better chip removal. Three-sided shank fits securely in the chuck of power tools and prevents slipping. Surface depth gauge makes drilling accurate. Water-cooled - For workpieces with hardness below 25°; For materials such as metal, wood, aluminum alloy, plastic board, insulation board, etc. What you get - 1 x Twist drill. Recommended drilling speed 250-400 rpm. Note: The data are all manual measurements, please allow 1-3 cm error; due to the difference in light and display, there may be a certain color difference, please refer to the actual item received.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$82.49 $71.49
-
M14 external thread to SDS Plus internal thread and internal triangle adapter for drill grinder, from DEBUNS
pieces SDS Plus and triangular shank adapter for diamond drill bits with M14 connection. Specifications: Material: Carbon steel. Quantity: 2 pieces. Design: SDS Plus shank and triangular shank. Contents: 1 SDS Plus rod. 1 triangular rod. Note: Do not use this adapter for hammer models, this SDS Plus shank is not SDS Max.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$35.73 $30.49
-
HSS Step Drill Ø 6-60mm - Spiral Large Cone Drill for Metal, Wood, Plastic
Large Step Drill - The step drill is designed in 12 steps of drill diameter: 6-60mm (6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm). Unique enlargement holes, no need to change drill and positioning holes during use. Material - The step cone cutter is made of HSS 4241 high-speed steel and titanium coating on the surface. Anti-rust, anti-wear and heat, longer service life. Spiral design - 135 split tip and 2-groove double-edged design ensure faster and smoother cutting, stable removal and better chip removal. Three-sided shank fits securely in the chuck of power tools and prevents slipping. Surface depth gauge makes drilling accurate. Water-cooled - For workpieces with hardness below 25°; For materials such as metal, wood, aluminum alloys, plastic plates, insulation boards, etc. What you get - 1 x Twist drill. Recommended drilling speed 250-400 rpm. Note: The data are all manual measurements, please allow 1-3 cm error; due to the difference in light and display, there may be a certain color difference, please refer to the actual item received. Guaranteed customer service: If you have any problems, please do not hesitate to contact us! Our customer service team is here to help you quickly . Fast delivery: We will process and ship your order as soon as possible . However, due to exceptional circumstances (holidays, extreme weather, high demand, etc.), a slight delay may occur. In this case, we will keep you informed as soon as possible . Quality guarantee: Your satisfaction is our priority! We are committed to providing you with quality products for a worry-free purchase . Thank you for your trust and support . We look forward to offering you an exceptional shopping experience! Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$92.74 $80.49
-
20pcs Carbon Brushes for Angle Grinder Compatible with Bosch Replacement Repair Power Tool Spare Part 15x8x5mm
[Application]: Compatible with Bosch angle grinder. [Dimensions]: 15x8x5mm/0.59x0.31x0.20in. [Package List]: 20x Carbon Brushes, other accessories are not included. [Durable Material]: Made of good quality material, sturdy and durable, great for replacing your old or worn out ones. [Note]: Please confirm the size before ordering. Please allow 1-2mm error due to manual measurement.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$30.26 $26.49
-
Twist Drill Set 6-60mm for Metal, Wood, Plastic - Compatible with HSS Cone Drills
Large Step Drill - The step drill is designed in 12 steps of drill diameter: 6-60mm (6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm). Unique enlargement holes, no need to change drill and positioning holes during use. Material - The step cone cutter is made of HSS 4241 high-speed steel and titanium coating on the surface. Anti-rust, anti-wear and heat, longer service life. Spiral design - 135 split tip and 2-groove double-edged design ensure faster and smoother cutting, stable removal and better chip removal. Three-sided shank fits securely in the chuck of power tools and prevents slipping. Surface depth gauge makes drilling accurate. Water-cooled - For workpieces with hardness below 25°; For materials such as metal, wood, aluminum alloy, plastic board, insulation board, etc. What you get - 1 x Twist Drill. Recommended drilling speed 250-400 rpm. Note: The data are all manual measurements, please allow 1-3 cm error; due to the difference in light and display, there may be a certain color difference, please refer to the actual item received.Returns, Refunds and ReplacementsProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.Delivery TimeframePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$81.83 $70.49
-
pieces 6mm x 10mm 16mm motor carbon brush replacement for CB-103
Product Name: Motor Wood Brush; Fit: Power Tools Brush Size: 16 x 10 x 6 mm / 5/8 x 3/8 x 15/64 inch (L x W x T); Total Length (): 4 cm / 1.57 inch (when stretched) Material: and metal; Color: Black and gold Net Weight: 20g This is a non- Motor brushes are one of the most common components for power tools, such as electric hammer, electric drill, angle grinder, etc. Worn brushes are often the cause of a low-speed motor. Can also be used as replacement parts for other brands of power tools as long as the size is suitable Hundreds of carbon brushes are listed in this store, you can always find the right size Carbon Brushes Package Contents: 8 x Motor Carbon Brush The above package content only, other products are not included. Note: Due to the light and screen setting difference, the color tone of the pictures and the actual item may be slightly different. The allowed measurement error is +/- 1-3 cm.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$31.32 $27.49
-
Milling Chuck - Set of 6, Countersunk Collet (6 mm, 6.35 mm, 8 mm), Router Collet, Collet Adapter
Hole diameters: 6mm/6.35mm/8mm, 3 sizes available to meet different needs. Comes with 2 nuts. High-quality materials: The engraving and cutting machine chuck is made of carbon steel, which has high flexibility and wear resistance. Fine workmanship and stable performance, portable and easy to use. High-precision clamping, firm and stable, improving work efficiency. The router collet is suitable for engraving on wood routers, cars, molds and mechanical engineering. It is the ideal tool for engraving machines and wood routers.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$37.86 $32.49
-
Suitable for Milwaukee 18V battery-powered brushless angle grinders, 3-speed operation, 100mm diameter electric cordless polishing and cutting. As Shown
Brushless powerful movement, high temperature resistant copper enameled wire, anti-overload, anti-burning machine Thickened guard to place spark damage Improved side handle, more stable hand control Two gear speeds, one second quick shift Ergonomic design, slim soft body, fits better in the palm of your hand, work becomes more comfortable Motor type: brushless motor Voltage: 18V Battery model: Compatible with Milwaukee 18V Battery size: 100mm Rated speed: 10000 rpm Color: As shown Material: Plastic+Metal Package Contents: 1 x Angle Grinder (Not including battery) 1 x Accessories Only the above package content, other products are not included Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is +/- 1-3 cm. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL) We are committed to ensuring all products meet the standards of quality and reliability expected by our customers However, please note that we do not accept returns or provide refunds for change of mind We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$148.20 $128.49
-
PU 240 mm belt Electric planer drive belt for 1900B
Product Name: Electric Planer Belt for 1900B Color: Orange Material: PU Weight: 23g Package Contents: 3 x Electric Planer Belt (Non-) Dimensions: 240 x 10mm (Circumference * B) Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is ±1-3cm.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$28.07 $24.49
-
6mm Straight Router Bit Set, 7 Pieces Woodworking Carbide Straight Groove Router Bits for Wood, Compatible with Bosch, Makita
【7 Different Sizes】The router bit set includes 7 different sizes, 3mm/4mm/5mm/6mm/8mm/10mm/12mm. Shank: 6mm. Variety of options for your needs. 【High Quality Material】The router bit set is made of high quality carbide, more durable, anti-distortion, anti-rust, antioxidant and tear-resistant. 【Versatile】Suitable for wood, MDF, particle board, compact plywood. Avoid cutting ferrous metals and other hard materials, steel, iron, etc. 【Perfect for Woodworking】For trimming and slotting, for refining woodworking projects. It is ideal for woodworkers and hobbyists of all levels. 【PACKAGE INCLUDES】7 pieces of straight router bits for woodworking.Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$39.34 $34.49
-
10pcs Double Cut Tungsten Steel Rotary Files with 3mm Shank, Twist Drill Bits for Dremel Rotary Tools
Tungsten Carbide Rotary File Set, Single Cut, 1/8" Shank. Fits Shank Diameter: 3mm, Shank Length: 35mm, Cutting Diameter: 6mm. Material: Tungsten | Carbide. Usage: Rotary deburring, high micro-hardness, high wear resistance, good toughness. High performance in processing copper, aluminum, alloy, iron, marble, jade, steel, glass, wood and gypsum, etc. Highly recommended for metal and plastic polishing, jewelers, stone grinding, hobby, crafts, model making, home repairs and more. Features: ? High processing quality, high finish. ? Easy to master, easy to use, safe and reliable. ? Can be made into a variety of high-precision shaped mold cavities. ? Durability than high-speed steel tools to improve ten times, more than 200 times higher than the small grinding wheel. Specification: ? Drill Size: 6mm ? Shank Diameter: 3 mm ? Compatibility: Small rotary tools and high-speed polishers ? The optimal rotation speed is 6000-40000 r/min ? Included: 10 pcs tungsten steel solid edges in a storage box. Brand: It is recommended to use water as a lubricant when using these files. All files in this set have a shank size of ? "(3 mm), making them compatible with most grinders and rotary tools when shaping, grinding and finishing your work with precision. ? When the job or project is complete, you will be happy to place your files in the compact storage case so that you can store, organize and transport this set for future use. Contents: 10 pcs rotary file toolsReturns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$40.68 $35.49
-
2135-K303 Air Intake Kit Compatible with 2135 2131 2135Ti 2112 1/2 inch Impact Wrench Replacement Part
2135-K303 and 2131-K• Compatible with 2115TIMAX and 2125TiMAX Impact Wrench. Built to strict standards, using top-quality components. Wear-resistant, stable performance and reliable for . Quickly install these parts to revive your equipment's performance, making it work like new. Please check your model matches ours before ordering for compatibility. Color: As Shown Material: Iron Package Contents: 1 set * 2135-K303 Air Intake Kit The above package content only, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The allowed measurement error is +/- 1-3 cm. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$44.54 $38.49
-
Power Tool Organizer Wall Mount 7 Drill Holder 3 Layer Heavy Duty Metal for Drill Plier Hammer Rack Suitable for Workshop Garage
Description Upgrade your workspace effortlessly with our Wall-Mounted Power Tool Holder. With a swift 15-minute installation, secure with screws, and enjoy versatile storage. The upgraded version offers 23cm of height, 10cm mid-tier storage, and added hammer and pliers holders. Robust steel ensures a 100kg load-bearing capacity on sturdy walls. Accommodating 50+ tools, indoor or outdoor, our pegboard-compatible design simplifies storage. Feature Perfect Design: The Power Tool Organizer Wall Mount boasts a 3-layer design that provides effortless access to your tools. Measuring at 66 cm, it offers ample space for all your equipment, with an additional 10cm mid-tier for larger tools and Side Handles for added protection on the top shelf. Ergonomic Design: Experience the ultimate in organization and durability with our Power Tool Organizer Wall Mount! Made from premium alloy steel and expertly welded, this rack can handle up to 100kg without compromising its reliability or sturdiness. Extras : Equip your workshop or garage with the ultimate tool storage solution - the Power Tool Organizer Wall Mount! This heavy-duty metal rack can hold up to 7 drills and has 3 layers for extra storage space. 15 Min Easy Installation: Assemble the wall-mounted tool rack effortlessly by connecting the pieces with the included screws. Setup will be a breeze. Our organizers go above and beyond to exceed your expectations. If you need help with our wall shelving, don't hesitate to reach out to us. We are dedicated to ensuring your satisfaction and are always available to assist you. Contact our Customer Support for any concerns. Specification Material:Alloy Steel Special Feature: Thickened Frame, Easy Installation, 7 Drill Holders, Hammer and Pliers Hangers Product Dimensions: 66cm H x 20cm W x 23cm H(External) Shelf Type: Floating Shelf Number of Shelves:3 Room Type: Garage, Tool room, Work shop Finish Type: Powder Coated Content 1 x Power Tool Organizer 1 x Installation Accessories Bag
$83.00 $60.49
-
Magnetic Door Stopper Floor Gray - No Drilling - Self-adhesive - Metal - Including Raising Disc
Keep your doors open in style and prevent slamming by drilling into your floor without drilling holes. Looking for a solution to keep your doors open, but the gap under your door is too large for standard stoppers Or would you rather not drill into your beautiful tile or laminate floor This white magnetic door stop offers the solution. Thanks to the unique included riser and strong adhesive strip, you can install it in under a minute. Features and Benefits DrillFree Installation Thanks to the strong selfadhesive 3M tape, you can attach the stopper securely to the floor. This is ideal for rented homes or if you have underfloor heating and dont want to drill into the pipes. Screw mounting is also an option. Unique Includes Raising Disk Where other stoppers fail with a high threshold or large gap, this set offers a solution. Use the included raising disk to raise the floor stopper, ensuring the magnet always makes perfect contact with the door. Strong Magnetic Action The powerful magnet keeps the door firmly open, even when theres a draft in the house. With a light pull, you can easily close the door again. Durable and Stylish Made of robust metal zinc alloy with a modern white finish. The compact and flat design looks neat in any bedroom, bathroom or office. How to use Determine the correct position of the stopper and the part on the door. Important Thoroughly clean, dry and greasefree the floor and the door in those areas. Is the gap under the door large Then first install the raising disk under the stopper. Remove the protective film and stick the parts in place. Let the adhesive cure for 24 hours before intensive use. Product specifications Type Magnetic Door Stopper Floor Color Gray Material Metal Installation No drilling selfadhesive or with screws both included Special feature Comes with raising disk for large gaps Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law ACL. We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes excluding weekends and public holidays are as follows For customers in Victoria, approximately 7-10 working days For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days For customers in WA, NT, and TAS, approximately 9-12 working days.
$37.91 $32.49
-
75CC Petrol Demolition Saw Concrete Cut Off Wet Demo Cutter Road Brick 350MM
When your job demands cutting through concrete, brick or asphalt — you don’t want gear that stalls or struggles. The KingTech 75CC Petrol Concrete Saw is built for serious work. With a 350 mm blade and a cut depth up to 125 mm, this saw delivers professional-grade performance. The 75 cc commercial 2-stroke engine pushes up to 9,500 RPM, offering 4.5 HP of raw cutting muscle. Ergonomic wrap-around steel handle, smart balance, rugged construction — it’s made to take abuse. No fluff, just dependable cutting when you need it most. Feature Highlights Cuts up to 125 mm deep — among the highest capacity in its class Uses a 350 mm blade / cutting wheel for broad coverage Driven by a 75 cc commercial 2-stroke petrol engine Revs up to 9,500 RPM for high torque under load Produces 4.5 HP / 3.3 kW output for demanding work Ergonomic wrap-around steel front handle for control and leverage Balanced center of gravity for easier handling over long jobs Fully adjustable blade guard — easy one-handed adjustment Wet cutting attachment included — reduces dust for safer work Lightweight for a petrol saw: 16.5 kg Uses 25:1 fuel mix — you supply fuel and 2-stroke oil Pull-start / recoil starter for reliable ignition Specs That Matter Brand KingTech Engine 75 cc, 2-stroke, commercial grade Blade / Wheel Size 350 mm Max Cut Depth 125 mm Max RPM 9,500 RPM Power 4.5 HP (3.3 kW) Weight 16.5 kg Fuel Mix 25:1 (fuel : 2-stroke oil) Fuel Tank 1.3 L Starter Type Pull-start / recoil Handle Type Wrap-around steel front handle Features Adjustable blade guard, wet cutting mode, balanced design, durable build For returns due to change of mind, a 20% restocking fee will be applied.
$479.49
-
Wood Carving Bit Set For ROtary Tool, 5 Pieces Wood Carving Bits With 1/8 Inch Shank For Diy Woodworking, Engraving,
【Material】: Made of high quality high speed steel for long service life, strong and sharp, anti-corrosion, excellent wear resistance 5pcs engraving tools, packed in a transparent box. 【Three Blade Design】: Increased efficiency, ideal tool for precision work such as deep grooves, V-slots, curved patterns and lines The three blade design can quickly and automatically clear chips from the hole, suitable for carving, engraving, grinding, drilling and more, leaving a smooth finished surface. 【Perfect Tool for DIY and Home Repair】: Widely used on different types of wood for DIY, wood carving, model making, pet house making, house repairing and other woodworking A must-have carving tool to create your own masterpiece. 5 different sizes (3mm, 4mm, 5mm, 6mm, 8mm) to meet different needs. 【Universal Shank】: 1/8 inch shank fits most rotary tools with a three-jaw chuck, easy to change. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$54.29 $47.49
-
2 pcs Wood Drill Bits, Hss Drill Bit Set, 8Mm Steel Countersink Drill Bits, Countersink Drill Bit Set For Woodworking,
Premium Materials: High quality alloy blades, waterproof and anti-corrosion, hardened HSS steel blades sharper and more durable Good Design: Adjustable limits of the round shank for a wider range of applications, stable clamping effect and easy to use Removable and Adjustable: Use the included hex wrench to remove the screw and adjust the length of the countersunk hole to adjust the drilling length of screws of different lengths Practical: HSS spiral flute drill bit set with a center drill will quickly discharge chips from the hole It can effectively prevent the accumulation of debris retention and improve drilling efficiency. Multi-Purpose: Countersink drill bits suitable for home or professional woodworking, used on wood, plastic, PVC, fiberboard, particleboard, plywood, rubber and more. Returns, Refunds and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations. Delivery Timeframe Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows: For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.
$50.39 $43.49
You have seen 120 out of 743 products